SMOK TFV4 Subohm Tank 5mlKepatuhan TPD
SMOK TFV4 Subohm Tank Kit - 5ml, an innovative new design subohm tank, suitable for high wattage 40W - 130/140W, top refill, different types of coils for choice.
- Jaminan Kualitas 100%
- Pengiriman dalam 24 Jam
- Jaminan uang kembali dalam 7 hari
Anda boleh membeli bermacam produk untuk mendapatkan harga grosir
USD 41.00 USD 50.00
USD 41.00 USD 61.50
USD 34.10 USD 42.00
USD 21.22 USD 26.00
USD 37.80 USD 46.00
USD 51.80 USD 64.80
USD 36.68 USD 45.00
USD 36.70 USD 45.00
USD 45.00 USD 54.00
USD 59.00 USD 71.00
Shipping restriction: Due to exclusive distributor of SMOK, we do not send SMOK products to customers in Australia, Paraguay, Poland, Russia, Denmark, Netherlands, Czech, Slovakia or Ukraine. You can check more exclusive distributors .
SMOK TFV4 Subohm Tank Kit - 5ml
SMOK TFV4 Subohm Tank Kit - 5ml, an innovative new design subohm tank, suitable for high wattage 40W - 130/140W, top refill, equipped with quadruple and triple coil head and RBA head (single). It also has innovative drip tip and improved airflow system. The last tank you will ever need!
Size (height x diameter): 73.5mm x 24.5mm
It comes with
- 1 x TFV4 Tank (Black)
- 1 x New Patent Quadruple Coil Head (0.15ohm, work with 40W - 140W)
- 1 x New Patent Triple Coil Head (0.2ohm, work with 40W - 130W)
- 1 x RBA Head
- 1 X Replacement Glass Tube
- 2 x Decorative Silicone Ring
- 1 x Screwdriver
- 1 x 1pc of cotton
- 1 x silicone cushion
- 1 x User Manual
Simple packing. Customary packing from the factory, the packing is subject to change without notice.
Four Types Innovative Coil Heads
Double-layered Heat Insulation Drip Tip
100% Organic Cotton
How to fill e-liquid:
hold your tank with your left hand, and use another one to press top cap and move it counterclockwise;
add e-liquid through the slot, and pay attention not to drip it into the central airflow tube;
lastly, close the cap carefully and firmly. Then let it wait for several minutes to get the organic cotton completely saturated.
How to build the RBA:
before, please make sure your hands are clean;
take RBA apart;
install and position the pre-wrapped coil: place the coil between the posts and wrap the ends around the screws and tighten up, make sure the coil is fined in the center and lined up with the air hole and also make sure the coil is not touching the base;
cutting the ends of wire off;
cut a strip of cotton and make sure it's not too much or too less;
insert the cotton, and placing it in the middle;
cutting the cotton at an angle and make sure it's not too short or too long.
wet the coil with your liquid and adjust the cotton.
- It comes with 510 thread.
- You shall buy e-liquids separately at here.
- Click download to get certificate: CE, ROHS.
Share your thoughts with other customersTulis ulasan
Typical questions asked about products:
- Is the item durable?
- Is this item easy to use?
- What are the dimensions of this item?